This free cleaning solution calculator tells you how much cleaner and how much water you need to fill a bottle, a bucket or a mop tank. Type in the amount of solution you want, pick the unit, and enter the dilution ratio from your product label. You get the exact amounts in a few seconds, plus the cleaner in tablespoons if you have no measuring jug. I made it because guessing the mix is how most people end up with a sticky floor or a weak spray. Fill in the boxes below and press Calculate.
Cleaning Solution Calculator
How to use this cleaning solution calculator
Type in how much finished solution you want to make, then pick the unit. Next, enter how many parts of water go with every 1 part of cleaner. If your bottle says 1 to 10, type 10. Press Calculate and you get the exact amount of cleaner and water.
The result also shows the cleaner in tablespoons, which is handy when you do not have a measuring jug. It also shows the cleaner as a percentage of the mix, so you can compare it with the label.
How the numbers work
Add 1 to the parts of water. That gives you the total number of parts. The calculator divides your total amount by that number to get one part, which is the cleaner. Everything else is water.
So for a 1 to 4 mix, there are 5 parts in total. One part is cleaner and four parts are water. That is why 500 ml of finished solution needs 100 ml of cleaner and 400 ml of water.
Cleaner and water amounts for 1 litre
These amounts are for 1 litre of finished solution. For a bigger or smaller batch, use the calculator above.
- 1 to 1 mix: 500 ml cleaner and 500 ml water.
- 1 to 4 mix: 200 ml cleaner and 800 ml water.
- 1 to 9 mix: 100 ml cleaner and 900 ml water.
- 1 to 10 mix: about 91 ml cleaner and 909 ml water.
- 1 to 20 mix: about 48 ml cleaner and 952 ml water.
- 1 to 50 mix: about 20 ml cleaner and 980 ml water.
Example: filling a 500 ml spray bottle
Say you want a spray for kitchen counters, and the label says to mix 1 part cleaner with 4 parts water. Set the total to 500 ml and the water parts to 4. The calculator gives 100 ml of cleaner and 400 ml of water.
Pour the water in first, then add the cleaner. This way you get less foam, and the bottle does not overflow. Put the cap on and tip the bottle gently a few times. Do not shake it hard, because shaking makes bubbles that take a while to settle.
Safety rules before you mix anything
- Always follow the dilution on the product label. This calculator only does the maths, so the ratio has to come from the bottle.
- Never mix bleach with ammonia, vinegar or other cleaners. The fumes can be dangerous.
- Use only one cleaner at a time in a bottle. Do not top up a bottle that holds a different product.
- Wear gloves for stronger cleaners, and open a window if the room is small.
- Keep every bottle out of reach of children and pets.
Write the name of the cleaner and the date on every bottle you fill. Plain water bottles and old drink bottles are a bad idea, because someone may drink from them by mistake. Use a proper spray bottle and label it.
Common mistakes when diluting cleaners
- Making the mix stronger than the label says. More cleaner does not mean cleaner floors. It often leaves a sticky film, and it wastes product.
- Making it too weak. If the solution is far weaker than the label, it will not clean or disinfect properly.
- Mixing a big batch and keeping it for weeks. Some diluted cleaners lose strength over time, so mix small amounts and check the label for storage advice.
- Mixing up ratios. A 1 to 10 mix means 1 part cleaner plus 10 parts water, so the cleaner is about 9 percent of the total. It is not 10 percent.
- Skipping a spot test. Try the solution on a hidden corner first, especially on wood, stone and painted surfaces.
Cleaning solution calculator FAQ
Can I use this calculator for any cleaner?
Yes, as long as the label gives a dilution ratio. The calculator only splits your total amount into cleaner and water, so it works for floor cleaners, all purpose sprays and laundry liquids that need diluting.
What does a 1 to 10 ratio mean?
It means 1 part cleaner and 10 parts water. For 1 litre of finished solution, that is about 91 ml of cleaner and 909 ml of water.
Should I put the water in first or the cleaner?
Water first is usually better. It cuts down the foam and the splashing. Some strong products have their own mixing steps on the label, so check it first.
How much cleaner is in a bucket of water?
A standard bucket holds around 10 litres. Choose litres in the calculator, type 10 as the total, and enter the ratio from your label. The result tells you how much cleaner to measure out.
